Xsens

From Animation Luzern Wiki

Motion Capturing with Xsens



_

_

So far we're providing two suits with the case

Case and Content

The case contains everything you need to capture full body performances. Additional to that there are two suits.

The Sensors

There should be 18 sensors in the case. These 17 are essential to get the capturing process started at all:

Upper Body

  • 1 x Head
  • 1 x Stern
  • 3 x Left Shoulder
  • 1 x Left Hand
  • 3 x Right Shoulder
  • 1 x Right Hand

Lower Body

  • 1 x Pelvis
  • 3 x Right Leg
  • 3 x Left Leg

There is an additional sensor for a potential Prop.

The Sensors are connected to cable whips that should be contained in the same bag as the sensors.


The Bodypack

The whips are then connected to the bodypack. The bodypack is a small computer that processes the information provided by the sensors.


The Battery

The battery, if properly charged, provides the bodypack with energy.

So far we're providing two suits with the case

The Router

The router is connected to a PC with an Ethernet Cable and receives the information from the bodypack. That information is then processed by the Xsens Mvn Software.

The Dongle

The dongle is an authentification device that needs to be plugged into the PC to get the Xsens Mvn Software running.

Additional Accesoires

Additional

Dressing up

Using the right dimensions

This is how you put on the lycra suit.

So far we're offering two suits. L (1.60-1.75) and XL (1.75-1.85). You shouldn't put it on if you're larger than that.

Washing the suit

Due to hygienic reasons you must always wash the suit after using it. Remove all cables, Bodypack and Motiontrackers. Follow the instructions on the label inside the suit:

  • Only Synthetic machine wash at 30°C!!!
  • Do not bleach
  • Do not iron
  • Do not dry clean
  • Do not tumble dry
  • For the headband, gloves and straps use only cold hand wash.

Wiring things up

You can follow this instructional video to wire up the suit. Always have a second person to help you set things up.

Xsens Mvn FullBody Software

There is a lot of information about the Software and how to use it on their support page.

Installing the Software

Download the Xsens Full Body Motion Suit Software here. As long as the dongle is plugged into the PC, it sould start.

Live Streaming

Integration with external Software

OBR (On Body Recording)

Procedure

Troubleshooting

Sensor not responding

Sensor ID Remapping

Live Link being blocked by OBR

Calibration not working